Spring Loaded Pogo Pin Connector Single Pin 7.0 MM Height PCB Right Angle 90 Degree
We provide many series of spring-loaded connectors Spring loaded pin, spring-loaded connector is a special type of contact technology .This reliable technology has been used by many world-class customers and applied for many kinds of electronic products, such as cell phones, GPS, notebooks PC, hearing aids, smart watch.
- Working Frequency: Low
- Pin Type: Customized
- Shape: Round
- Technology: Cold Press
- Material: Brass
- Rated Voltage: 3.37-36V DC
- Rated Current: 0.5--50A continuous per Pin
- Working Temperature: -40°C--85°C
- Storage Temperature: -40°C--85°C
- Working Environment Temperature: 10%RH-90%RH
- Lifespan: 10,000cycles
- Contact Resistance: ≤30mΩ
- Insulation Resistance: 500mΩ Min
- Spring force: 80g ±20%
|
|
Custom DIP Spring Loaded Contact Pogo Pin For PCB Mount Pin Connector
|
|
|
stainless steel, Brass, Aluminum, Etc.
|
|
|
Zinc / Nickel / Copper Plating, Powder Coating, Etc.
|
|
|
Nonstandard or OEM
|
|
|
100pcs
|
|
|
PE bag inside, carton outside or per our customers needs
|
| Structure |
Ball beads structure |
Sloping structure |
Perforated structure |
Claw structure |
| Contact impedance |
≤ 10mΩ |
≤ 30mΩ |
≤ 50mΩ |
≤ 5mΩ |
| Long service time |
10000+ |
10000+ |
10000+ |
500+ |
| Recommended working current |
10A max |
10A max |
10A max |
10A max |
| Main application areas |
Mainly used for charging and condition with certain requirements for vibration and shock |
Mainly used for charging or signal transmission of Consumer electronics |
Mainly used for signal transmission or grounding antenna,etc. |
Mainly used high-frequency,anti-instantaneous,the situation which high-reliability is required,such as base stations,military industries,vehicles. |
| Remarks |
The beads increase the internal contacts,the contact is more stable,and the more needle space is required |
The most commonly used structure on the market |
The space is smaller,but the contact is not stable,the current is easy to run through the spring,and it is not recommended for charging |
The needle and the needle tube have multiple contacts to increase the contact stability |
How to place the order
* You send us drawing or sample
* We carry through project assessment
* We make the sample and send it to you
* You think the sample is good then place an order and pay us 30% deposit
* We start to make the product
* When the goods is done, we take photoes for your check and you then pay the balance
* We deliver the products to courier company
Product Tags:
|
|
PCB 10mm Spring Loaded Right Angle POGO Pin Magnetic 7.0MM 90 Degree Images
|
